Electrical Packaging
Mono-material PE film packaging for electrical and electronic products. Dimensions, gauge and printing are set per order.
MaterialPE
Product description
- Mono-material 100% polyethylene
- Size and film gauge planned for the product
- Flexographic printing, up to eight colours; also produced unprinted
- Recycled content available on request
Electrical packaging is polyethylene film packaging used for packing electrical and electronic products. This page describes the product through its area of use; the film and the production method are the same as in our other PE packaging.
Production
The product is mono-material 100% polyethylene. The film is produced in our own facilities by blown extrusion as a single layer; there is no lamination, no barrier layer, no metallised layer and no non-polyethylene component such as paper, aluminium or polyamide. Flexographic printing is applied in our own facilities and goes up to eight colours. Cutting and sealing are also done in our own facilities.
Surface and printing
The surface can be clear, gloss or matt; these are options independent of one another. On a clear surface the product shows through the pack. Printing is a separate option: it goes up to eight colours flexographically, and the product is also made unprinted. Tell us what is being packed and how it will be presented, and we will settle the right combination together.
Variants
A side or bottom gusset can be given. The film gauge is chosen to suit the job; printing goes up to eight colours and the product is also made unprinted.
Material and compliance
Where recycled content is required, recycled polyethylene can be used at the requested share; that use is independently verified under GRS 4.0 and RCS 2.0 scope certificates. A scope certificate on its own does not prove that a given shipment is covered; if you need documentation at shipment level, we need to discuss that at order stage. That document is a Transaction Certificate and is issued separately.
If you ship into the EU, this product falls within the scope of our declaration of material composition — the declaration covers garment and jacket bags, mailing bags, retail carrier bags and general purpose PE bags. You can find which documents you may request on our PPWR compliance page.
What do you need for a quote?
The size and weight of what is packed, whether you want it clear or printed, your printing requirement and your estimated annual volume. With that we work out the dimensions, gauge and print plan together.
Dimensions and gauge are set per order.
Technical specifications
- Material
- 100% polyethylene, mono-material
- Printing
- Flexographic, up to eight colours; also produced unprinted
- Dimensions and gauge
- Set per order
- Gusset
- Side or bottom, optional
- Surface
- Gloss, matt or clear
- Film gauge
- Chosen to suit the job
- Recycled content
- At the requested share, optional
The values in this table are standard production ranges, not a binding quote. Size, micron, capacity, closure type and printing are set per order; exact values are confirmed with a sample and quote approval.
Applications
- Packaging electrical and electronic products
- Product handover and carrying
- Storage and shipment
- Bulk packing
Frequently asked questions
What dimensions and gauge do you produce?
Dimensions and gauge are set per order. Tell us the size and weight of what is packed and how the pack will be used, and we will settle the specification together.
Can it be made clear?
Yes. The surface can be clear, and gloss or matt is also produced. If the product should show through the pack, clear production suits you.
Can it be printed?
Yes, flexographic printing goes up to eight colours. The print area and layout are planned per order; the product is also made unprinted.
Can it be made with recycled content?
Yes, recycled polyethylene can be used at the requested share. Our use of recycled content is independently verified under GRS 4.0 and RCS 2.0 scope certificates.
How does it differ from your other PE bags?
Technically it is from the same family: mono-material polyethylene film. This page describes the product through its use in electrical and electronic packaging; the dimensions, the film gauge and the printing are planned for that use.
Request a quote for Electrical Packaging
Consult our R&D team for custom film, bag and packaging solutions.